ELITEGROUP COMPUTER SYSTEMS, INC.

CI-92 SUPER I/O CARD

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drives supported:     Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  34-pin control cable connector - floppy drive           J1

  40-pin IDE(AT) Interface connector                      J2

  15-pin game port - internal                             J3

  10-pin serial port (COM1/3/4) - external                J4

  10-pin serial port (COM2/3/4) - internal                J6

  25-pin parallel port (LPT1/2/3) - external              J7

  2-pin connector - Drive active LED                      JP1

                        USER CONFIGURABLE SETTINGS

                Function                     Location         Setting

  »   Parallel port is uni-directional         JP3             closed

      Parallel port is bi-directional          JP3              open

                 SERIAL PORT 1 (J4) INTERRUPT REQUEST - J5

         IRQ             Jumper 1          Jumper 2          Jumper 3

          IRQ3             open             closed             open

  »       IRQ4            closed             open              open

          IRQ5             open              open             closed

                 SERIAL PORT 2 (J6) INTERRUPT REQUEST - J5

         IRQ             Jumper 4          Jumper 5          Jumper 6

  »       IRQ3            closed             open              open

          IRQ4             open             closed             open

          IRQ5             open              open             closed

                 PARALLEL PORT (J7) INTERRUPT REQUEST - J5

            IRQ                   Jumper 7                Jumper 8

  »   IRQ7                         closed                   open

      IRQ5                          open                   closed

                  SERIAL PORT 1 (J4) CONFIGURATION - JP2

             COM                    Jumper 1               Jumper 2

  »        COM1 (3F8h)         pins 2 & 3 closed      pins 1 & 2 closed

           COM3 (3E8h)         pins 1 & 2 closed      pins 2 & 3 closed

           COM4 (2E8h)         pins 2 & 3 closed      pins 2 & 3 closed

            Disabled           pins 1 & 2 closed      pins 1 & 2 closed

                  SERIAL PORT 2 (J6) CONFIGURATION - JP2

             COM                    Jumper 3               Jumper 4

  »        COM2 (2F8h)         pins 2 & 3 closed      pins 1 & 2 closed

           COM3 (3E8h)         pins 2 & 3 closed      pins 2 & 3 closed

           COM4 (2E8h)         pins 1 & 2 closed      pins 2 & 3 closed

            Disabled           pins 1 & 2 closed      pins 1 & 2 closed

                  PARALLEL PORT (J7) CONFIGURATION - JP2

             LPT                    Jumper 5               Jumper 6

           LPT1 (378h)         pins 2 & 3 closed      pins 1 & 2 closed

  »        LPT2 (278h)         pins 1 & 2 closed      pins 2 & 3 closed

           LPT3 (3BCh)         pins 2 & 3 closed      pins 2 & 3 closed

            Disabled           pins 1 & 2 closed      pins 1 & 2 closed